Table of Contents

Hems & Grommets

Get banners, flags and canvas prints ready for finishing in seconds. Hems & Grommets adds the hems and bleed, places the grommet marks, draws the cut and fold lines and writes the specs on the print, all from one panel.

See it in the shop · Version 2.8.4 · Needs PowerScripts 3.8.42 or later

The video shows an older version: the panel looks a little different, but it works the same way.

Where to find it

Open the PowerScripts panel (Window > Extensions > PowerScripts) and choose Create Hems & Grommets from the Tools scripts. The script has four tabs: Hems & Grommets, Grommets on Path, Grommet Specs and Options.

Quick start

  1. Place your artwork as a linked file in a new document, on an artboard the finished size of the banner.
  2. On Hems & Grommets, set Apply to: Current Artboard and Crop to: Artboard Size.
  3. Under Hems, set the size of each hem, for example 30 mm, and choose mirror.
  4. Under Grommets, tick Add Grommets and set the spacing, for example 500 mm Spacing with a 25 mm Offset.
  5. Press Create Hems and Grommets.

The artboard grows to take the hems, the grommet marks are placed, and the specs are written under the print.

Options

Hems & Grommets

The Hems & Grommets tab

Layout

Hems

For each side (Top, Bottom, Left, Right) set the size and the type:

The lock boxes next to each pair link Top with Bottom and Left with Right, so changing one changes the other. Lock All Hem Inputs links all four.

Grommets

Marks

Finishing up

Grommets on Path

The Grommets on Path tab

Place grommets along any path you draw, for example round a shaped sign.

Grommet Specs

The Grommet Specs tab

How the grommet marks look: Line width, Keyline width (the wider line behind, so marks show on any colour), and the Dark Color and Light Color of the two lines.

Options

The Options tab

How to...

A PVC banner with hems and eyelets

  1. Place the artwork, artboard at the finished size.
  2. Hems: 40 mm all round, mirror (tick Lock All Hem Inputs).
  3. Grommets: Approx Space 500 mm, Offset 20 mm, tick Add grommet marks in corners.
  4. Marks: tick Add Specifications and type the job number as the label.
  5. Press Create Hems and Grommets.

A flag with a sewn edge

  1. Hems: double mirror on the sides to be sewn, none on the others.
  2. Tick Add centre fold lines under Marks.
  3. Press Create Hems and Grommets.

A template for customers

  1. Start with an empty artboard at the finished size.
  2. Set up the hems and grommets, then press Create Hems and Grommets. When it says the artboard is blank, choose to continue.
  3. Save the file and send it to your customer: the marks show exactly where the hems and grommets go.

Tips

Good to know

What's new